Lumber, roof, span and fastener tables

Joist, Beam and Rafter Spans

These pages work out how far a wood member can span from your inputs: size, spacing, loads and the design values of the lumber. They use the standard bending, shear and deflection formulas and show which limit governs, with every assumption listed. They do not copy code span tables, and the result is not a code check. The span tables adopted where you build, an engineer and the building department decide what is allowed, and a permit may be required.

Tools in this group

  • Beam Span Calculator — Enter the beam size, number of plies, tributary width and loads to see the maximum span from bending, shear and deflection, plus a chart of sizes against widths.
  • Ceiling Joist Span Chart — Pick a joist size, spacing, wood species and attic load to see the maximum ceiling joist span, the limit that governs, and a chart of every size and spacing.
  • Floor Joist Span Chart — Pick a joist size, spacing and wood species to see the maximum floor joist span and which limit governs, plus a chart of every size and spacing.
  • Rafter Span Table — Enter the rafter size, spacing, roof load and pitch to get the maximum horizontal span, the length along the slope and a chart of every size and spacing.